| |
| |
Welcome to Ronetix's site
Ronetix's development tools give you a more efficient and economical way to develop embedded systems products.
|
|
| |
|
|
 PEEDI
High Speed
JTAG/BDM Emulator |
Flash Programmer
JTAG/BDM Programmer for on-board and on-chip Flash devices |
CPU Modules
Time and Cost effective solutions |
 |
All ARM7/9 and XScale based MCUs |
|
ARM11 based MCUs |
|
ARM Cortex-M3 |
|
Power QUICC II Pro - MPC83XX |
|
PowerPC MPC55xx, Nexus Class I |
|
ColdFire MCF52xx,MCF53xx,MCF54xx |
|
Blackfin BF5xx, BF532, BF533, BF537 |
|
Multi Core support - up to 4 cores |
|
Built in support for GNU gdb/insight |
|
Built in support for ARM ADP/RDI |
|
Target Flash Memory programming |
|
Standalone Flash Programmer |
|
10/100Base Ethernet interface |
|
Linux Kernel debugging with MMU |
|
uClinux support |
|
Full access to all CP15 registers |
|
|
|
Works in Standalone mode: the file |
| |
images are stored on a MMC/SD card |
|
Automatically starts programming |
|
Supports all ARM7, ARM9, ARM11, Cortex-M3, XScale based MCUs as well as |
| |
AT91SAM7, LPC2000, MAC7100, STR7, STR9 and TMS470, MPC55xx, MCF5282, TMS320DM6446, iMX31, STM32 |
|
Supports Nexus enabled PowerPC
MPC5500, MPC55XX |
|
Supports CodFire MCF52xx |
|
Supports Blackfin BF5xx, BF533, BF537 |
|
Atmel AT45DB SPI DataFlash |
|
NAND Flash programming |
|
NAND Flash JFFS2 support |
|
Small, robust aluminium case |
| |
|
|
|
 |
|
 |
 more |
more |
more |
 |
|
|
| |
|
|
| |
|
|
| Date |
Events |
| 26.02.2008 |
 |
If you wish to receive the latest news from Ronetix click here to subscribe to the newsletter
| Date |
News |
| 10-07-2008 |
Firmware release:
- Added Cortex-M3 support
- Added ST STM32 FLASH support
- Added PXA320 support
- Added new GDB registers frame support for MPC5500 targets
- Fixed MPC5500 watchpoint support
- Fixed NAND FLASH verify
- Made DBGREQ_OUTPUT available for all JTAG targets
- Licenses can be loaded from an external file
- Added AT91SAM7 "flash this secure" command
|
| 27-05-2008 |
Firmware release:
- Added PowerQUICC II Pro MPC83XX support
- Added Freescale MPC8313 NAND FLASH support
- Added Intel P33 FLASH support
- Added beep CLI command
- Improved TFTP support - download of files bigger than 32MB
- Fixed wait command on target disconnect
- Fixed BFIN connect procedure
- Fixed closing of remote GDB connection
- Fixed watchpoint count handling on most targets
- Made COREn_MEMMAP available for Blackfin
|
| 20-03-2008 |
Firmware release:
- Added NXP LPC2000 SPI FLASH support
- Added TI TMS470R1VF688 and TMS470R1VF689 FLASH support
- Added periodic TI TMS470 AWD kick
- Added TI OMAP CPU support
|
| 25-01-2008 |
Firmware release:
- Reworked "reset" CLI command to allow different reset types without changing the configuration file |
| 10-01-08 |
Firmware release:
- Added ARM11 support
- Added Freescale iMX31 NAND Flash hardware ECC generation
|
| 28-11-07 |
Firmware release:
- reworked Blackfin connect procedure
- added support for BF561
- corrected small bug in ADP debug protocol
|
| 23-10-07 |
Linux patch release:
- Linux patch for kernel 2.6.23.1 released
|
| 04-10-07 |
Firmware release:
- Added TI DaVinci DM644x support
- Added automatic generation of NAND Flash UBL descriptors for DaVinci DM644x
- Updated AT91SAM7 Flash Programmer
|
| 10-09-07 |
Firmware release:
- Added JTAG_TDO_DELAY CFG parameter
- Added Analog Devices Blackfin NAND FLASH programming support
- Added Atmel AT91SAM9263 DataFlash programming support
- Added Freescale MCF5272 BDM support
|
| 28-06-07 |
Firmware release:
- Added Analog Devices Blackfin debug support
- Added Analog Devices Blackfin FLASH programming support
- Added Blackfin virtual memory support
- Added memory and/or commands
- Added flash multi verify and flash multi blank commands
|
| 02-04-07 |
Firmware release:
- Added Freescale ColdFire debug support
- Added Freescale ColdFire Flash Programming support
- Added CLI over RS232 |
| 6-11-06 |
Firmware release:
- Added Freescale Nexus enabled MPC5500, MPC55XX debug support
- Added Freescale MPC5500, MPC55XX Flash programming support
- Added NAND Flash JFFS2 support
|
| 29-08-06 |
Firmware release:
- Added NAND FLASH support
- Optimized connecting to XSCALE CPUs
- Added ALLOW_ZERO_KEYS parameter in TMS470 family FLASH section
- Added COREn_PATH (default path per core) configuration parameter in TARGET section
- Added COREn_FILE (default file per core) configuration parameter in TARGET section
- Changed file path convention
- FILE_XXXX parameters replaced by single FILE parameter in FLASH sections
- Added memory verify command
- Added flash dump command
- Added clock command
- Added execution of the scripts defined in target configuration file from CLI
- Added support of using expression instead of a value in the commands |
| 02-07-06 |
Firmware release:
- Added Atmel DataFlash support
- Added TI TMS470 series microcontroller support
- Added ucLinux debugging support
- Added DCC over TCP support
- Added memory multi load command
- Improved XScale exception vectors handling |
| 19-03-06 |
Firmware release: corrected a minor bug (MAC7100 ); removed parameter STARTUP_TIME
complemented target connect procedure |
| 11-03-06 |
Firmware release: added MAC7100 support; added Dualcore support; added parameter WAKEUP_TIME in cfg file; reworked target connect procedure |
| 26-02-06 |
Firmware release: complemented Multi-Core support; corrected a bug in debugging ABORT state |
|
Ronetix specializes in JTAG emulation tools and debuggers for ARM7, ARM9, ARM11, XScale, PowerPC, ColdFire and Blackfin based MCUs. The company supplies complete software toolkits, intelligent debug probes and development boards for the ARM7, ARM9 and Blackfin technology implementations. Ronetix GmbH is headquartered in Vienna, Austria and has an extensive worldwide distribution network.
|
|
|
 |
