| Firmware |
Version |
Date |
Release Notes |
| » fw_peedi_rev.A_last.bin |
|
|
v7.1.x |
| » fw_peedi_rev.A_v7.1.0.bin |
v7.1.0 |
22.08.08 |
- Added unique serial number support in FLASH programmer
- Added EON EN29LV320 into the PEEDI FLASH database
- Corrected FLASH ID get sequence
- Fixed NAND bad block handling on iMX31
- Improved MMC/SD card support (now supports 1GB, 2GB and 4GB cards) |
| » fw_peedi_rev.A_v7.0.0.bin |
v7.0.0 |
10.07.08 |
- Added Cortex-M3 support
- Added ST STM32 FLASH support
- Added new GDB registers frame support for MPC5500 targets
- Fixed MPC5500 watchpoint support
- Fixed NAND FLASH verify
- Made DBGREQ_OUTPUT available for all JTAG targets
- Licenses can be loaded from an external file
- Added AT91SAM7 "flash this secure" command |
| » fw_peedi_rev.A_v6.1.0.bin |
v6.1.0 |
10.06.08 |
- Added PXA320 support
- Added Intel 28F512P30B |
| » fw_peedi_rev.A_v6.0.0.bin |
v6.0.0 |
27.05.08 |
- Added PowerQUICC II Pro MPC83XX support
- Added Freescale MPC8313 NAND FLASH support
- Added Intel P33 FLASH support
- Added beep CLI command
- Improved TFTP support - download of files bigger than 32MB
- Fixed wait command on target disconnect
- Fixed BFIN connect procedure
- Fixed closing of remote GDB connection
- Fixed watchpoint count handling on most targets
- Made COREn_MEMMAP available for Blackfin
|
| » fw_peedi_rev.A_v5.3.0.bin |
v5.3.0 |
20.03.08 |
- Added NXP LPC2000 SPI FLASH support
- Added TI TMS470R1VF688 and TMS470R1VF689 FLASH support
- Added periodic TI TMS470 AWD kick
- Added TI OMAP CPU support |
| » fw_peedi_rev.A_v5.2.0.bin |
v5.2.0 |
25.01.08 |
- Reworked "reset" CLI command to allow different reset types without changing the configuration file |
| » fw_peedi_rev.A_v5.1.0.bin |
v5.1.0 |
22.01.08 |
- Added Blackfin SPI Flash Programming |
| » fw_peedi_rev.A_v5.0.0.bin |
v5.0.0 |
10.01.08 |
- Added ARM11 support
- Added Freescale iMX31 NAND Flash hardware ECC generation |
| » fw_peedi_rev.A_v4.5.0.bin |
v4.5.0 |
28.11.07 |
- reworked Blackfin connect procedure
- added support for BF561
- corrected small bug in ADP debug protocol |
» fw_peedi_rev.A_v4.4.4.bin
» fw_peedi_rev.A_v4.4.0.bin |
v4.4.0 |
04.10.07 |
- Added TI DaVinci DM644x support
- Added automatic generation of NAND Flash UBL descriptors for DaVinci DM644x
- Updated AT91SAM7 Flash Programmer |
| » fw_peedi_rev.A_v4.3.0.bin |
v4.3.0 |
10.09.07 |
- Added JTAG_TDO_DELAY CFG parameter
- Added Analog Devices Blackfin NAND FLASH programming support
- Added Atmel AT91SAM9263 DataFlash programming support
- Added Freescale MCF5272 BDM support
|
|
| » fw_peedi_rev.A_v4.1.0.bin |
v4.1.0 |
29.06.07 |
- Corrected small bugs in MPC55xx
- Added 28F128W30 in the flash database |
| » fw_peedi_rev.A_v4.0.2.bin |
v4.0.2 |
28.06.07 |
- Added Analog Devices Blackfin debug support
- Added Analog Devices Blackfin FLASH programming support
- Added Blackfin virtual memory support
- Added memory and/or commands
- Added flash multi verify and flash multi blank commands |
| » fw_peedi_rev.A_v3.1.3.bin |
v3.1.3 |
25.04.07 |
- Corrected IDCODE database: added Freescale i.MX1 and Xilinx X2C CPLDs
- Added new devices in the Flash database |
| » fw_peedi_rev.A_v3.1.2.bin |
v3.1.2 |
16.04.07 |
- Corrected bug in "flash program" for STR7 chips |
| » fw_peedi_rev.A_v3.1.1.bin |
v3.1.1 |
12.04.07 |
- Corrected bug in "flash blank" for NAND chips |
| » fw_peedi_rev.A_v3.1.0.bin |
v3.1.0 |
06.04.07 |
- Added Freescale ColdFire debug support
- Added CLI over RS232
- Reworked ELF reader
- Updated MAC7100 Flash Programmer |
| » fw_peedi_rev.A_v2.0.13.bin |
v2.0.13 |
05.03.07 |
- v2.0.13 |
| » fw_peedi_rev.A_v2.0.0.bin |
v2.0.0 |
05.11.06 |
- Added Freescale Nexus enabled MPC5500, MPC55XX debug support
- Added Freescale MPC5500, MPC55XX Flash programming support
- Added NAND Flash JFFS2 support |
| » fw_peedi_rev.A_v1.13.bin |
v1.13 |
29.08.06 |
- Added NAND FLASH support
- Optimized connecting to XSCALE CPUs
- Added ALLOW_ZERO_KEYS parameter in TMS470 family FLASH section
- Added COREn_PATH (default path per core) configuration parameter in TARGET section
- Added COREn_FILE (default file per core) configuration parameter in TARGET section
- Changed file path convention
- FILE_XXXX parameters replaced by single FILE parameter in FLASH sections
- Added memory verify command
- Added flash dump command
- Added clock command
- Added execution of the scripts defined in target configuration file from CLI
- Added support of using expression instead of a value in the commands |
| » fw_peedi_rev.A_v1.12.bin |
v1.12 |
02.07.06 |
- Added Atmel DataFlash support
- Added TI TMS470 series microcontroller support
- Added ucLinux debugging support
- Added DCC over TCP support
- Added memory multi load command
- Improved XScale exception vectors handling |
| » fw_peedi_rev.A_v1.10.bin |
v1.10 |
12.04.06 |
- added XScale series support
- added ST STR7 series support
- reworked Flash Programmer when using SREC/IHEX files |
| » fw_peedi_rev.A_v1.9.bin |
v1.9 |
19.03.06 |
- corrected a minor bug (MAC7100 )
- removed parameter STARTUP_TIME
- complemented target connect procedure |
| » fw_peedi_rev.A_v1.8.bin |
v1.8 |
11.03.06 |
- added MAC7100 support
- added Dualcore support
- added parameter WAKEUP_TIME in cfg file
- reworked target connect procedure |
| » fw_peedi_rev.A_v1.7.bin |
v1.7 |
26.02.06 |
- complemented Multi-Core support
- corrected a bug in debugging ABORT state |
| » fw_peedi_rev.A_v1.6.bin |
v1.6 |
11.02.06 |
- add auto checksum at addr 0x14 for LPC2xxx
- corrected big-endian bug
- corrected IHEX/SREC bug |
| » fw_peedi_rev.A_v1.5.bin |
v1.5 |
18.01.06 |
- complemented Multi-Core support |
| » fw_peedi_rev.A_v1.4.bin |
v1.4 |
25.12.05 |
- added LPC2xxx support |
| » fw_peedi_rev.A_v1.3.bin |
v1.3 |
28.11.05 |
- added ADP debug protocol support
- added partition support for the MMC/SD card |
| » fw_peedi_rev.A_v1.2.bin |
v1.2 |
03.10.05 |
- multi core support (extra license is required)
- multi flash support
- auto FLASH program after target power detect |
| » fw_peedi_rev.A_v1.1.bin |
v1.1 |
23.08.05 |
-added STARTUP_MODE parameter in config file
- target connect procedure improvment |
| » fw_peedi_rev.A_v1.0.bin |
v1.0 |
14.06.05 |
- first release |
