| |
| |
JTAG/BDM Flash Programmer
 |
The JTAG/BDM Flash Programmer is a solution that enables you to program on-board and on-chip FLASH devices on ARM, PowerPC, ColdFire and Blackfin processor cores via the JTAG/BDM port.
Can be upgraded with debug capabilities - see PEEDI |
|
 |
| See more photos » |
|
Key Features
 |
CPU support: All ARM7, ARM9, ARM11, Cortex-M3, XScale, ColdFire, PowerPC and Blackfin based , including AT91SAM7, LPC2000, MAC7100, STR7, STR9, TMS470, TMS320DM6446 and iMX31
Cortex-M3: STM32
NEW!
XScale: PXA250, PXA270, PXA320, IPX425, IPX465
PowerPC: MPC5534, MPC5553, MPC5554, MPC5565, MPC5566, MPC5567, MPC8347, MPC8349
ColdFire: MCF52XX, MCF53XX, MCF54XX
BLACKFIN: BF5xx,
BF522, BF525, BF527, BF531, BF532, BF533, BF534, BF535, BF536, BF537, BF538, BF539, BF542, BF544, BF548, BF549, BF561A, BF561B |
| |
|
|
Can be used as a Standalone FLASH programmer without a host - the file images are stored on a MMC/SD card and controlled via the front panel interface |
| |
|
|
Automatically programs a FLASH device after the target power is detected |
| |
|
|
Can download images from TFTP, FTP, HTTP servers or MMC/SDcard |
| |
|
|
Support of various chip vendors: The built-in FLASH chip database contains information of more than 900 chips as well as Atmel AT91SAM7, Philips LPC2000 , Freescale MAC7100, MPC5500, MPC55XX, MCF52XX, iMX31, ST STR7, ST STR9, TI TMS470 and TI TMS320DM6446 - see supported flash devices |
| |
|
|
Blackfin virtual memory support - enables a linear programming and access to a device that is bigger than the visible external
asynchronous memory space |
| |
|
|
NAND Flash Programming - MCU independent |
|
NAND Flash JFFS2 support with various methods of ECC generating |
| |
|
|
Programming of Atmel AT45DB SPI DataFlash connected to an AT91 MCU - enables the easy use of AT45DB SPI DataFlash as boot device |
| |
|
|
Programming of ST M25P, Spansion S25F and SST SST25 SPI Flash devices connected to a Blackfin MCU |
| |
|
|
Automatic processor initialization on power-up and Reset |
| |
|
|
Telnet and Serial command line interface through the built-in telnet server for FLASH programming and debug services |
| |
|
|
Front panel interface: 2 buttons and 7-segment LED, up to 15 file images can be selected on the front panel |
| |
|
|
Ideal for small and mid-range manufacturing |
| |
|
|
Warranty:
Hardware 2 Years; Software 1 Year |
|
|
| Technical specification: |
| JTAG/BDM Clock: |
5kHz –33MHz, Adaptive Clocking
|
| Target Voltage: |
Autosense 1.2V-5V |
| Ethernet: |
10/100BaseT |
| LEDs: |
Power, Target Power, Ethernet Status, JTAG Status, 7 Segment led |
| Power Supply: |
5V / 1A
6.9V overvoltage shutdown,
reverse polarity protection
|
| Small robust aluminium case: |
| Dimensions: |
115x105x34mm |
| Weight: |
270
gram |
| I/O ports: |
JTAG/BDM Header 2x10, RJ45 RS232,
Power Jack 2.1mm |
| Buttons: |
Two on front panel, One on back
panel - Reset |
|
|
|
|
|
|
|
|
 |
PEEDI Brochure 