PM9263 - CPU Module with ATMEL AT91SAM9263
Top View Bottom View

Starter Kit is available »
Hardware features:
 
• CPU: AT91SAM9263, 240 MHz ARM926EJ-S
• 64MB DRAM, 32-bit
• 4MB NOR Flash, 16-bit (bootable, see note)
• 256 MB NAND Flash (see note)
• 2 MB Atmel Serial DataFlash (bootable, see note)
• 4 MB Video Memory on a separate external bus
• SPI EEPROM (optional)
• 10/100 MBits Ethernet
• Serial number chip DS2401
• SODIMM200 module (67x40mm)
 
  Note: PEEDI can easily program NOR Flash, NAND Flash JFFS2 images and DataFlash devices using the JTAG interface
   
Linux Software:
 
• Linux Install Readme
• GNU Tools (compiler, linker, debugger, etc.)
• U-BOOT
• Linux Kernel v2.6.23 including drivers for:
- NAND Flash, DataFlash
- Ethernet, Serial, USB Host, USB Slave
- LCD + Touchscreen
- Audio
 
Development tools:
 
• Evaluation Board EB9263
• PEEDI JTAG Emulatror and Flash Programmer capable to program in standalone mode NOR Flash devices, NAND Flash devices with JFFS2 image or bootloader, DataFlash devices.
   
AT91SAM9263 Key Features:

- 240 MHz ARM926EJ-S
- DSP Instruction Extentions
- ARM Jazelle Technology
- 16 KB Data Cache
- 16 KB Instruction Cache
- Memory Managment Unit
- Dual External Bus Interface
- DMA Controller
- 2D Graphic Accelerator
- CAN Interface
- AC97 Interface
- Embedded ICE
- 32 KB Internal ROM
- 96 KB Fast Internal RAM
- 324 balls LFBGA
- Low power, Vcore 1.2V

Download
Download Ronetix-toolset ARM
ARM Cross Development Guide
Linux Install Readme
EB9263 User's Manual
PEEDI User's Manual
Application notes
Eclipse User Guide
Copyright RONETIX © 2006. All rights reserved.